The OpenAIR jacket will be perfect for users who ride in high temperatures. All its features are focused towards comfort. The lightweight mesh fabric combined with certified hi-flow protectors is designed to hold the body well under impact, while providing good ventilation. The special shape of the protectors with a two-layer honeycomb structure provides effective protection and maximum air permeability. For additional safety the jacket is equipped with a CE level 2 back protector with the same technology and structure as the elbows and shoulders (CE level 1). This single-layered jacket has a short zipper and a connecting loop which allows it to be fastened to SHIMA trousers. The waist width can be adjusted to fit the body easily and the EvoLINK system allows the jacket to be combined with optional heating or cooling layers if required. With the OpenAIR jacket even the hottest day can be a riding day.
The proper fitting is user responsibility. The garment should fit snugly but not too tightly: no discomfort should be caused by the clothing when taking your normal riding position and you must be able to reach the controls easily.
To determine the exact size correctly, measure close to the body. The meter should not be tight. When measuring, it’ s recommended to wear only lightweight, fitted clothing and stand in a loose but upright position. To make the measurement more accurate, ask for assistance another person. If the measured values are between different sizes – always choose a larger size.
SIZE CHART:
INSTRUCTIONS & CERTIFICATES:
Wash or clean your garment following the washing instructions on the stitched label.Remove the inner protectors before washing your garment and make sure to insert them again in the dedicated pockets after washing! Never tamper with the garment in any of its parts. When not in use, the garment must be stored in a dry and ventilated place. After use leave it dry in a well ventilated place, at room temperature.
Care Instructions for OPENAIR JACKET:
• Before washing detach each layer and remove protectors
• Use mild detergent
• Do not use fabric softener
• Hand wash 30°C
• Do not bleach
• No dry cleaning
• Do not iron
• No wringing
• Drip dry verticaly in shade
Use same instructions as above for cleaning waterproof membrane.
To clean the protectors:
• Remove dirt with a damp cloth only; for heavier soiling use damp cloths or soft brushes with lukewarm water (max 40°C).
• Do not wash under running water
• Do not use hot water, solvents or other chemicals to clean the protector
• Use specific products for cleaning and maintaining leather
• Do not leave exposed to direct sunlight
• Do not leave it permanently exposed to high or low temperatures
• Do not use dryer or other heating devices
MATERIAL:
Outer shell:
100% Polyester
Linning:
100% Polyester
Feel the lightweight:
Reviews
Clear filtersThere are no reviews yet.