Engine Ice High-Performance Coolant
Engine Ice High-Performance Coolant is a premium, pre-mixed, ready-to-use coolant designed to provide efficient engine cooling and anti-corrosion protection for motorcycles, cars, ATVs, and other compatible vehicles. It is formulated for everyday riding as well as demanding off-road and performance applications.
Important Before Installation
- Do not mix Engine Ice with water or other coolants.
- Always work on a completely cool engine.
- Wear protective gloves and safety eyewear when handling coolant.
- If unsure, have the coolant replaced by a qualified mechanic.
How to Use Engine Ice
1. Drain Old Coolant
Drain the existing coolant completely and dispose of it responsibly.
2. Flush the System
Fill the system with clean water, run the engine briefly according to the manufacturer’s procedure, then drain. Repeat until the water runs clear.
3. Fill with Engine Ice
Reinstall the drain plug and fill the radiator directly with Engine Ice. Fill the coolant reservoir to the manufacturer’s recommended level.
4. Remove Air & Check Level
Follow the vehicle manufacturer’s procedure for removing trapped air. Check for leaks, allow the engine to cool, and recheck the coolant level. Top up with Engine Ice if required.
Maintenance
Follow your vehicle manufacturer’s recommended coolant change intervals. Regularly check the coolant level, hoses, radiator, and reservoir for leaks or contamination.
Important: Always refer to your vehicle’s owner’s or service manual for the correct coolant capacity and installation procedure. Do not dilute Engine Ice with water.
